HP LD4245tm User Guide - Page 105
Tile V Position (Command: d f), Set Tile H Position to 0x32 before setting Tile H Size.
![]() |
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
* This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][e][ ][Set ID][ ][Data][Cr] Data 00 to 20 (00H - 14H) *Left/Right values depend on Tile H size. ** It may not be supported depending on the model. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 29. Tile V Position (Command: d f) To adjust the Tile Vertical position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][f][ ][Set ID][ ][Data][Cr] Data 0 to 20 (00H - 14H) * Bottom/Top values depend on Tile Vertical size. ** It may not be supported depending on the model. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 30. Tile H Size (Command: d g) To adjust the Tile Horizontal size. *Set Tile H Position to 0x32 before setting Tile H Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][g][ ][Set ID][ ][Data][Cr] Data 0 to 50 (00H - 32H) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 31. Tile V Size (Command: d h) To adjust the Tile Vertical size. Transmission / Receiving protocol 95
![](/manual_guide/products/hewlettpackard-ld4245tm-user-guide-7964722/105.png)