HP LD4245tm User Guide - Page 109
Display Name (Command: v a), 43. Abnormal State (Command: k z), z][ ][Set ID][ ][OK/NG][Data][x]
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Acknowledgement [g][ ][set ID][][OK/NG][Data][x] ** It may not be supported depending on the model. 42. Display Name (Command: v a) To fill the Display Name field for VOE. Transmission [v][a][ ][Set ID][ ][Data][Cr] Data The data is always ff(in Hex). Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Data The data format is ASCII Code. 43. Abnormal State (Command: k z) Used to Read the power off status when Stand-by mode. Transmission [k][z][ ][Set ID][ ][Data][Cr] Data ff: Read Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] Data 00 : Normal (Power on and signal exist) 01 : No signal (Power on) 02 : Turn the display off by remote control 03 : Turn the display off by sleep time function 04 : Turn the display off by RS-232C function 08 : Turn the display off by off time function 09 : Turn the display off by auto off function * Subnet Mask, NSM Setup (Command: v l) To set the subnet mask for Network Sign Manager. Transmission [v][l][ ][Set ID][ ][Data] [Cr] Data Transmission / Receiving protocol 99