HP LD4245tm User Guide - Page 107
Remote Controller Lock/ Key Lock (Command: k m), 36. Key (Command: m c)
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
FF: Check the status Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] * Temperature is displayed in hexadecimal. 35. Remote Controller Lock/ Key Lock (Command: k m) When the remote control and front keys are locked in standby mode, the power cannot be turned on using the remote control or front power button. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Off (Lock Off) 01: On (Lock On) * Display will not be turned on by power on key of remote controller and front panel control keys, if key is locked on in standby mode. Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 36. Key (Command: m c) To send a key code of the IR remote control. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data IR_KEY_CODE Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] For a key code, see the IR Code. * Some key codes are not supported depending on the model. 37. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement Transmission / Receiving protocol 97