HP LD4245tm User Guide - Page 106
Natural Mode (In Tile Mode) (Command : d j), 33. DPM Select (Command: f j)
![]() |
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
*Set Tile V Position to 0x00 before setting Tile V Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][h][ ][Set ID][ ][Data][Cr] Data 00 to 50 (00H to 32h) ** It may not be supported depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 32. Natural Mode (In Tile Mode) (Command : d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the displays is omitted. Transmission [d][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 33. DPM Select (Command: f j) To set the DPM (Display Power Management) function. Transmission [f][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 34. Temperature Value (Command: d n) To check the inside temperature value. Transmission [d][n][ ][Set ID][ ][Data][Cr] Data 96 Appendix C Controlling multiple products
![](/manual_guide/products/hewlettpackard-ld4245tm-user-guide-7964722/106.png)