HP LD4245tm User Guide - Page 59
display is turned on.
![]() |
View all HP LD4245tm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
● The recognition speed of a USB storage device may depend on each device. ● Do not turn off the display or unplug the USB device when the connected USB storage device is working. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. ● Only use a USB storage device that has normal music files, image files or video files. ● Use only a USB storage device that was formatted as a FAT32 file system, NTFS file system by with the Windows operating system. In case of a storage device formatted with a different utility program that is not supported by Windows, it may not be recognized. ● Connect power to a USB storage device (over 0.5 A) that requires an external power supply. If not, the device may not be recognized. ● Connect a USB storage device with the cable included by the device maker. ● Some USB storage devices may not be supported or operate smoothly. ● File alignment method of USB storage devices can recognize up to 100 English characters. ● Be sure to back up important files since data stored on a USB memory device may be damaged. We will not be responsible for any data loss. ● If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. Please use a power adaptor for an external power source. ● If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. ● If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. ● If the USB memory device does not work properly, disconnect and reconnect it. ● How fast a USB memory device is detected differs from device to device. ● If the USB is connected in Standby Mode, that drive will automatically be loaded when the display is turned on. ● The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory. ● Any device with more than the recommended capacity may not work properly. ● If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to make it work properly. ● USB storage devices below USB 2.0 are supported as well. But they may not work properly with videos. ● A maximum of 999 folders or files can be recognized under one folder. ● It is recommended you use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur. ● A USB 3.0 storage device may not work. Connecting USB storage devices 49
![](/manual_guide/products/hewlettpackard-ld4245tm-user-guide-7964722/59.png)