HP ML115 HP ProLiant ML115 Generation 5 Server Maintenance and Service Guide - Page 49

Removal and Replacement Procedures, Removing the PCI card, Installing the PCI card

Get HP ML115 - ProLiant - G5 PDF manuals and user guides
UPC - 884962252765
View all HP ML115 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

To remove the PCI card: 1. Hold the card at both ends and then carefully rock the card back and forth until the expansion cards pull free from the slot. 2. Store the old card in the anti-static packaging. Figure 27 Removing the PCI card To install the PCI card: 1. Hold the card above the expansion slot on the system board and then move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis. 2. Press the card straight down into the expansion slot on the system board. Figure 28 Installing the PCI card To replace the PCI slot cover lock: 1. Slide the PCI slot cover lock onto the rails toward the server. 2. Replace the slot cover lock retaining screw. Removal and Replacement Procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Removal and Replacement Procedures
49
To remove the PCI card:
1.
Hold the card at both ends and then carefully rock the card back and forth until the expansion
cards pull free from the slot.
2.
Store the old card in the anti-static packaging.
Figure 27
Removing the PCI card
To install the PCI card:
1.
Hold the card above the expansion slot on the system board and then move the card toward the
rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the
chassis.
2.
Press the card straight down into the expansion slot on the system board.
Figure 28
Installing the PCI card
To replace the PCI slot cover lock:
1.
Slide the PCI slot cover lock onto the rails toward the server.
2.
Replace the slot cover lock retaining screw.