HP ML115 HP ProLiant ML115 Generation 5 Server Maintenance and Service Guide - Page 60

Replace the access panel., Reconnect all power cords.

Get HP ML115 - ProLiant - G5 PDF manuals and user guides
UPC - 884962252765
View all HP ML115 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

5. Remove the access panel. 6. Remove knock-out feature from chassis. (see figure 46) 7. Press the card straight down into the expansion slot on the system board. 8. Be sure the card is at the correct position and the bracket on the card is aligned with the open slot on the rear of the chassis. 9. Fasten the expansion card bracket on the rear panel with screw. 10. Replace the access panel. 11. Reconnect all power cords. Figure 46 Remove the knock-out feature Figure 47 Installing the IPMI card CAUTION: Do not discard the IPMI card bracket dummy. If the IPMI card is removed in the future, the IPMI card bracket dummy must be reinstalled. Removal and Replacement Procedures 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Removal and Replacement Procedures
60
5.
Remove the access panel.
6.
Remove knock-out feature from chassis. (see figure 46)
7.
Press the card straight down into the expansion slot on the system board.
8.
Be sure the card is at the correct position and the bracket on the card is aligned with the open
slot on the rear of the chassis.
9.
Fasten the expansion card bracket on the rear panel with screw.
10.
Replace the access panel.
11.
Reconnect all power cords.
Figure 46
Remove the knock-out feature
Figure 47
Installing the IPMI card
CAUTION:
Do not discard the IPMI card bracket dummy. If the IPMI card is removed in the future,
the IPMI card bracket dummy must be reinstalled.