HP Mellanox SX1018 Mellanox MLNX-OS® User Manualfor SX1018HP Ethernet - Page 30
Setup Menu
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
• Ethernet Management Rev 1.6.9 Make sure to save your changes before switching between menus or sub-menus. Click the "Save" button to the right of "Save Changes?". Figure 7: WebUI 3.2.1 Setup Menu The Setup menu makes available the following submenus (listed in order of appearance from top to bottom): Table 14 - Setup Submenus Submenu Title Interfaces HA Description Used to obtain the status of, configure, or disable interfaces to the InfiniBand fabric. Thus, you can: set or clear the IP address and netmask of an interface; enable DHCP to dynamically assign the IP address and netmask; and set interface attributes such as MTU, speed, duplex, etc. Not functional. Mellanox Technologies 30 Mellanox Technologies Confidential
Rev 1.6.9
Mellanox Technologies
30
Mellanox Technologies Confidential
•
Ethernet Management
Figure 7: WebUI
3.2.1
Setup Menu
The
Setup
menu makes available the following submenus (listed in order of appearance from top
to bottom):
Make sure to save your changes before switching between menus or sub-menus. Click the
“Save” button to the right of “
Save Changes?
”.
Table 14 - Setup Submenus
Submenu Title
Description
Interfaces
Used to obtain the status of, configure, or disable interfaces to the InfiniBand
fabric. Thus, you can: set or clear the IP address and netmask of an interface;
enable DHCP to dynamically assign the IP address and netmask; and set inter-
face attributes such as MTU, speed, duplex, etc.
HA
Not functional.