HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array installatio - Page 44
edges, and then, with even pressure, pulling toward you until the retaining clips disengage.
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. If necessary, loosen the locking nut on the device retaining bracket and slide the bracket to the farthest position near the rear of the rack. 7. Repeat through to install the other rail. 8. Remove the bezel from the front of the MSA1510i by grasping the bezel by its left and right outside edges, and then, with even pressure, pulling toward you until the retaining clips disengage. 9. From the front of the rack, place the MSA1510i on the rails and slide it into the rack. 44 Installation
6.
If necessary, loosen the locking nut on the device retaining bracket and slide the bracket to the
farthest position near the rear of the rack.
7.
Repeat through to install the other rail.
8.
Remove the bezel from the front of the MSA1510i by grasping the bezel by its left and right outside
edges, and then, with even pressure, pulling toward you until the retaining clips disengage.
9.
From the front of the rack, place the MSA1510i on the rails and slide it into the rack.
44
Installation