HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array installatio - Page 73
All new targets will use the CHAP secret to authenticate the initiator. Any established sessions
![]() |
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3. To make any changes to the existing CHAP parameters, click Configure. The CHAP Authentication dialog box opens. 4. To keep CHAP enabled, make sure Use the following CHAP credentials is selected. 5. To use a new CHAP name, uncheck the Use initiator name check box, and enter the name of your choice. 6. If needed, specify the CHAP secret. All new targets will use the CHAP secret to authenticate the initiator. Any established sessions are not affected. 7. Click OK to save changes. 8. Perform a rescan. 1510i Modular Smart Array installation and user guide 73
![](/manual_guide/products/hewlettpackard-storageworks-1510i-hp-storageworks-1510i-modular-smart-array-installation-user-guide-383070002-2008-1efa5c4/73.png)
3.
To make any changes to the existing CHAP parameters, click
Con
fi
gure
.
The CHAP Authentication dialog box opens.
4.
To keep CHAP enabled, make sure
Use the following CHAP credentials
is selected.
5.
To use a new CHAP name, uncheck the
Use initiator name
check box, and enter the name
of your choice.
6.
If needed, specify the CHAP secret.
All new targets will use the CHAP secret to authenticate the initiator. Any established sessions
are not affected.
7.
Click
OK
to save changes.
8.
Perform a rescan.
1510i Modular Smart Array installation and user guide
73