HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array installatio - Page 66
Microsoft iSCSI Initiator, want to connect to and will enter in the next step.
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
d. Expand the drop-down boxes and enter the following settings: • Local adapter: Microsoft iSCSI Initiator • Source IP: Enter the IP address of the NIC that has access to the target portal that you want to connect to (and will enter in the next step). • Target Portal: Select the destination target portal you want to connect to. (Example: 100.10.1.20:3260) IMPORTANT: Several Target Portal IP addresses may be presented. Be sure that the Source IP address and the corresponding Target Portal have a viable path. The ping command can be used to verify that the path is accessible. e. Click OK. The Targets tab is updated and redisplayed. 66 Configuration
d.
Expand the drop-down boxes and enter the following settings:
•
Local adapter:
Microsoft iSCSI Initiator
•
Source IP: Enter the IP address of the NIC that has access to the target portal that you
want to connect to (and will enter in the next step).
•
Target Portal: Select the destination target portal you want to connect to.
(Example: 100.10.1.20:3260)
IMPORTANT:
Several Target Portal IP addresses may be presented. Be sure that the Source IP address
and the corresponding Target Portal have a viable path. The
ping
command can be
used to verify that the path is accessible.
e.
Click
OK
.
The Targets tab is updated and redisplayed.
66
Con
fi
guration