HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array installatio - Page 51
Connecting Ethernet cables, Connecting Ethernet cables in a singlepath con, guration
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Connecting Ethernet cables To connect the MSA1510i to the network switch, use qualified Category 5e (or better) Ethernet cables. IMPORTANT: Make sure that the first connection to the network switch is from port 0 (top port) of the primary Ethernet iSCSI module. This port is configured to carry both management and iSCSI storage traffic. NOTE: To obtain 1000BaseT performance from the MSA1510i, use 1000BaseT Ethernet NICs, 1000BaseT network switches, and connect the devices using Category 5e or better qualified Ethernet cables. 100BaseT devices and cables in the network cause the MSA1510i to reduce its performance level to that of the slowest network component. Connecting Ethernet cables in a singlepath configuration In the following illustration, a basic single-path configuration includes a server, a network switch, the MSA array controller shelf, and an attached storage enclosure. 1 Server 2 iSCSI Ethernet network switch 3 MSA1510i controller shelf newpage pi 4 Storage enclosure (MSA20 SATA) 5 Ethernet cables 6 SCSI cable 1510i Modular Smart Array installation and user guide 51