HP StorageWorks MSA1510i HP StorageWorks 1510i Modular Smart Array installatio - Page 55
Verifying the operating status of the devices, Viewing the LEDs on the MSA1510i
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Verifying the operating status of the devices To verify that your server, switches, MSA1510i, and attached storage enclosures are operating properly, view the device LEDs, and then compare them with the patterns described in the documentation for the devices. If the LEDs indicate a fault, see documentation that came with the device. For information about the MSA1510i, see the MSA1510i maintenance and service guide.http://h18006.www1.hp.com/products/storageworks/msa1510i. IMPORTANT: Depending on the IP address that is automatically assigned to the MSA1510i, the MSA and its storage may be inaccessible to the network. If needed, change the IP address through the MSA controller LCD panel. For instructions, see "Changing the management port IP address through the MSA1510i controller display panel" on page 102. Included sections: • Viewing the LEDs on the MSA1510i • Reading startup messages on the controller display panel • Troubleshooting Viewing the LEDs on the MSA1510i Each module of the MSA1510i is equipped with LEDs. To verify that your MSA1510i is operating properly, look for the following LED patterns: Table 4 MSA1510i normal status lights MSA1510i component LED Condition Power On/Standby button Green = power is on. MSA1510i controller heartbeat LED Blinking green = the array controller is functioning properly. 1510i Modular Smart Array installation and user guide 55