HP Tc4100 hp server tc4100 operation and maintenance guide (English, 2.1) - Page 115

Installing the System Board Assembly, Captive Screw Locations

Get HP Tc4100 - Server - 256 MB RAM PDF manuals and user guides View all HP Tc4100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

Chapter 7 Replacing Parts 13. The System Board assembly is secured to the chassis by four blue thumbscrews. Two of these screws are on the System Board assembly and closest to the front of the server. The other two thumbscrews are at the rear of teh server inside the chassis. 14. Loosen the four captive thumbscrews. See .Figure 7-12 Screw (6 Places) Standoff (2 Places) Captive Thumb Screws Rear of System 6543 21 12345 0 123 Captive Thumb Screws Front of System WARNING Warning Label Tray keySlot (9 Places) Figure 7-12. Captive Screw Locations 15. Slide the system board towards the front of the system until it stops (approximately 1/2 inch). 16. Using the thumbscrews closest to the top of the server (pedistal model) or right side of the server (rackmount model), pull up and out to remove the System Board assembly out of the chassis. Installing the System Board Assembly 1. Install the new System Board on the System Board assembly. 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
113
Chapter 7
Replacing Parts
13.
The System Board assembly is secured to the chassis by four blue thumbscrews. Two of these screws are
on the System Board assembly and closest to the front of the server. The other two thumbscrews are at the
rear of teh server inside the chassis.
14.
Loosen the four captive thumbscrews. See .
Figure 7-12
Figure 7-12.
Captive Screw Locations
15.
Slide the system board towards the front of the system until it stops (approximately 1/2 inch).
16.
Using the thumbscrews closest to the top of the server (pedistal model) or right side of the server (rack-
mount model), pull up and out to remove the System Board assembly out of the chassis.
Installing the System Board Assembly
1.
Install the new System Board on the System Board assembly.
WARNING
6
5
4
3
0
1
2
3
2
1
1
2
3
4
5
Warning Label
Tray
keySlot
(9 Places)
Captive
Thumb
Screws
Captive
Thumb
Screws
Standoff
(2 Places)
Screw
(6 Places)
Front of
System
Rear of
System