HP Tc4100 hp server tc4100 operation and maintenance guide (English, 2.1) - Page 48

Remove Terminator Board, When installing a second processor

Get HP Tc4100 - Server - 256 MB RAM PDF manuals and user guides View all HP Tc4100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Chapter 3 Installing and Configuring • If the Server is in the rack, perform steps 1-14 from "Removing Covers - Rack-Mount" on page 21. NOTE It is not necessary to remove the system board from the Server to install the new processor module. 6. Verify the processor speed and FSB setting, before installing the second processor module. Both processor modules must have the same clock speed, cache size, FSB speed, and product number. NOTE When installing a second processor, the processor speed is set automatically. No manual setting of switches is necessary. NOTE The System board is shown removed from the HP Server tc4100 for simplicity in the following figures, but it is not necessary to remove the system board to install the new processor module. 7. Remove the terminator from the secondary processor socket by lifting up the lever and pulling the terminator upwards. NOTE Save the terminator in the CPU protective bag for future needs. 1 Lift Up Lever Terminator 2 Figure 3-17. Remove Terminator Board 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
46
Chapter 3
Installing and Configuring
•
If the Server is in the rack, perform steps 1-14 from
“Removing Covers – Rack-Mount” on page 21
.
6.
Verify the processor speed and FSB setting, before installing the second processor module.
Both processor modules must have the same clock speed, cache size, FSB speed, and product number.
7.
Remove the terminator from the secondary processor socket by lifting up the lever and pulling the
terminator upwards.
Figure 3-17.
Remove Terminator Board
NOTE
It is not necessary to remove the system board from the Server to install the new
processor module.
NOTE
When installing a second processor, the processor speed is set automatically. No manual
setting of switches is necessary.
NOTE
The System board is shown removed from the HP Server tc4100 for simplicity in the
following figures, but it is not necessary to remove the system board to install the new
processor module.
NOTE
Save the terminator in the CPU protective bag for future needs.
1
2
Lift Up
Lever
Terminator