HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Upgrade and Maintenance - Page 42
Installing Main Memory
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
CAUTION NOTE 2 How to Install Accessories in Your Minitower PC Installing Memory Installing Memory Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the PC while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. Hold it by the edges and avoid touching the components and connectors. Installing Main Memory Your PC is supplied with main memory. If you need more main memory to run your application software, you can install up to a total of 256 MB (two 128 MB modules). Main memory is available in modules of 16 MB, 32 MB, 64 MB, or 128 MB. There are two memory "banks" (or slots), with each bank supporting one SDRAM memory module. You can mix modules of different sizes if you wish-for example, you can put a 32 MB module in one slot and a 64 MB module in the other. Although you can install Error Correcting Code (ECC) memory modules, the PC does not perform any error correction. You can mix ECC and non-ECC memory modules. 32 English