HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Upgrade and Maintenance - Page 43
Install any other accessories before replacing the power supply unit
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2 How to Install Accessories in Your Minitower PC Installing Memory To install a main memory module: 1 Disconnect the PC's power supply cord and any connection to a telecommunications network. 2 Remove the PC's cover. 3 If necessary, remove the power supply unit. 4 Slide the memory module into the slot's socket at 90o to the system board (the module will only fit into the socket one way round). 5 Firmly press the memory module completely into the socket until the retaining clips click into position. If you need to remove a main memory module, release the retaining clips and pull the module out of the socket. 6 Install any other accessories before replacing the power supply unit (if you removed it earlier) and replacing the cover. Reconnect all cables and power cords. 7 Check the summary screen to verify the new configuration (To see the summary screen, press while the Vectra logo is displayed during system startup.) English 33