HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Upgrade and Maintenance - Page 78
If There Is a Beep Code During Startup
![]() |
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
4 Troubleshooting Your PC If There Is a Beep Code During Startup If There Is a Beep Code During Startup Problem Cause Solution PC beeps during Number system startup of Beeps 1 DRAM Refresh failure. Try reseating the memory first. If the error still occurs, replace the memory with known good 2 Parity circuit failure. modules. 3 Base 64 KB memory failure. 4 System timer failure. Contact HP Support or your authorized dealer for 5 Processor failure. further troubleshooting information. 6 Keyboard controller / Try reseating the keyboard controller chip. If the Gate A20 failure. error still occurs, replace the keyboard chip (controller). If the error persists, check parts of the system relating to the keyboard. For example, try another keyboard, and check whether the system has a keyboard fuse. 7 Virtual mode exception Contact HP Support or your authorized dealer for error. further troubleshooting information. 8 Display memory Replace the video board or the memory on the read/write failure. video board. Indicates a memory error on the video board. 9 ROM BIOS checksum It is unlikely that this error can be corrected by failure. Indicates faulty reseating the chips. Contact HP Support or your BIOS chip(s). authorized dealer for further troubleshooting information. 10 CMOS shutdown register read/write error. Contact HP Support or your authorized dealer for further troubleshooting information. 68 English
![](/manual_guide/products/hewlettpackard-vectra-ve-cxxx-7-hp-vectra-ve-cxxx-series-7-pc-upgrade-maintenance-guide-d6538upgaba-7db5d1a/78.png)