HP Vectra VE C/xxx 7 HP Vectra VE C/xxx Series 7 PC - Upgrade and Maintenance - Page 56
Wake On LAN, Advanced - Power Management Setup
View all HP Vectra VE C/xxx 7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2 How to Install Accessories in Your Minitower PC Installing Accessory Boards 8 The accessory board may need a special connection, such as: • Network cable to the WOL (Wake On LAN) connector. • Sound cable to the CD-ROM drive. The following figure shows the location of the WOL connector. WOL connector (already connected for models with a preinstalled LAN card) NOTE For more information, refer to the documentation that came with the accessory board. The necessary cables are usually provided with the accessory board. 9 Install any other accessories before replacing the cover. Reconnect all cables and power cords. If you install a network board and connect it to the WOL connector, you must enable the Wake On LAN field in the Setup program (Advanced - Power Management Setup) if the network board supports this mode. After you have installed certain types of accessory, for example, a network board, you must reinstall Service Pack 3 (Windows NT 4.0 only). You must also reinstall the drivers for the video card. You can download the correct drivers from HP's Web site at: http://www.hp.com/go/vectrasupport/. 46 English