HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 102
WARNING, Push back while maintaining downward pressure on the board, so all standoffs remain engaged.
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
4 Lift the system board out 2 of the chassis, being careful not to damage the cables and rear panel connectors. 2 1 To replace the system board: 1 Insert straight down and make sure all system board standoffs engage with the keyholes in the chassis. NOTE Be sure the system board connectors engage correctly with the rear I/O panel. 2 Push back while maintaining downward pressure on the board, so all standoffs remain engaged. NOTE You only need to push back while engaging the first screw. WARNING! The system board is not secure until the CPU heatsinks are installed. 3 Install the heatsink (page 98). 102 REMOVAL AND REPLACEMENT PROCEDURES
102
REMOVAL AND REPLACEMENT PROCEDURES
4
Lift the system board out
2
of the chassis, being careful not to damage the cables and rear panel
connectors.
To replace the system board:
1
Insert straight down and make sure all system board standoffs engage with the keyholes in the
chassis.
NOTE
Be sure the system board connectors engage correctly with the rear I/O panel.
2
Push back while maintaining downward pressure on the board, so all standoffs remain engaged.
NOTE
You only need to push back while engaging the first screw.
WARNING!
The system board is not secure until the CPU heatsinks are installed.
3
Install the heatsink (
page 98
).
1
2