HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 91
Hard Drive, Removing a Hard Drive
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter 4 2 While lifting the green drivelock release tab, slide the drive forward into the chassis. 3 Route the diskette drive data cable between the system board and the hard drive cage. Your cable might look different than the one shown. CAUTION The cable must stay between the system board and the hard drive cage. It might be necessary to push the cable down so that it catches on the system board. This routing method is important because you do not want to interfere with the CPU heatsink fans or block airflow. 4 Connect the cables from the back of the diskette drive. Hard Drive For more information on SATA hard drives and the SATA RAID configuration, see Appendix B, "SATA Devices," on page 145. Removing a Hard Drive 1 Disconnect power from the system (page 66) and remove the access panel (page 71). 2 Disconnect the cables from the back of the hard drive. REMOVAL AND REPLACEMENT OF COMPONENTS 91