HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 63

Chapter 4 Table 4-1 Static Electricity NOTE 700 volts can degrade a product. Preventing Electrostatic Damage to Equipment Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of sensitivity. The following packaging and grounding precautions are necessary to prevent damage to electric components and accessories. „ Transport products in static-safe containers, such as tubes, bags, or boxes to avoid hand contact. „ Protect all electrostatic parts and assemblies with conductive or approved containers or packaging. „ Keep electrostatic sensitive parts in their containers until they arrive at static-free stations. „ Place items on a grounded surface before removing them from their container. „ When handling or touching a sensitive component or assembly, ground yourself by touching the chassis. „ Avoid contact with pins, leads, or circuitry. „ Place reusable electrostatic-sensitive parts from assemblies in protective packaging or conductive foam. Personal Grounding Methods and Equipment Use the following equipment to prevent static electricity damage to equipment: „ Wrist straps are flexible straps with a maximum of one-megohm ± 10% resistance in the ground cords. To provide a proper ground, wear the strap against bare skin. The ground cord must be connected and fit snugly into the banana plug connector on the grounding mat or workstation. „ Heel straps, toe straps, and boot straps can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use them on both feet with a maximum of one-megohm ± 10% resistance between the operator and ground. Table 4-2 Static Shielding Protection Levels Method Antistatic plastic Carbon-loaded plastic Metallized laminate Voltage 1,500 7,500 15,000 Grounding the Work Area To prevent static damage at the work area: „ Cover the work surface with approved static-dissipative material. Provide a wrist strap connected to the work surface and properly grounded tools and equipment. „ Use static-dissipative mats, foot straps, or air ionizers to give added protection. SERVICE CONSIDERATIONS 63