HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 97
processor by rotating the heatsink back and forth.
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 4 loosen the remaining pair 2. Do not fully loosen one screw, then move on to the next. Loosen all of the screws a little at a time, making sure the processor remains level. 1 2 2 1 4 Disconnect the CPU heatsink fan connector 3 from the system board. 5 Before lifting the heatsink, carefully break the adhesive compound between the CPU heatsink and processor by rotating the heatsink back and forth. 3 6 Use alcohol and a soft cloth to clean all of the thermal interface material residue from the CPU heatsink and processor. CAUTION Allow the alcohol on the processor and CPU heatsink to dry completely. REMOVAL AND REPLACEMENT OF COMPONENTS 97
REMOVAL AND REPLACEMENT OF COMPONENTS
97
Chapter 4
loosen the remaining pair
2
. Do not fully loosen one screw, then move on to the next. Loosen all of
the screws a little at a time, making sure the processor remains level.
4
Disconnect the CPU heatsink fan connector
3
from the system board.
5
Before lifting the heatsink, carefully break the adhesive compound between the CPU heatsink and
processor by rotating the heatsink back and forth.
6
Use alcohol and a soft cloth to clean all of the thermal interface material residue from the CPU
heatsink and processor.
CAUTION
Allow the alcohol on the processor and CPU heatsink to dry completely.
1
1
2
2
3