HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 88
CAUTION, until the drive is secured.
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
NOTE The audio cable is only required for Linux-based systems. 3 Lift the green drivelock release lever and gently slide the drive out of the chassis. To replace an optical drive: 1 Lift the green drivelock release lever while sliding the optical drive into the bay. When the optical drive is partially inserted, release the drivelock release lever and slide the drive completely into the bay until the drive is secured. CAUTION Ensure that the optical drive is secure. Failure to do so can cause damage to the drive when moving the workstation. 2 Connect the power, drive, and audio (if required) cables to the drive and workstation. NOTE The audio cable is only required for Linux-based systems. 88 REMOVAL AND REPLACEMENT PROCEDURES
88
REMOVAL AND REPLACEMENT PROCEDURES
NOTE
The audio cable is only required for Linux-based systems.
3
Lift the green drivelock release lever and gently slide the drive out of the chassis.
To replace an optical drive:
1
Lift the green drivelock release lever while sliding the optical drive into the bay. When the optical drive
is partially inserted, release the drivelock release lever and slide the drive completely into the bay
until the drive is secured.
CAUTION
Ensure that the optical drive is secure. Failure to do so can cause damage to the drive when
moving the workstation.
2
Connect the power, drive, and audio (if required) cables to the drive and workstation.
NOTE
The audio cable is only required for Linux-based systems.