HP Xw8200 HP Workstation xw8200 Service and Technical Reference Guide (Complet - Page 65

Chapter 4 Special Handling of Components The following components require special handling when servicing the workstation. Cables and Connectors Cables must be handled with care to avoid damage. Apply only the tension required to seat or unseat the cables during insertion or removal from the connector. Handle cables by the connector or pull strap whenever possible. In all cases, avoid bending or twisting the cables, and be sure that the cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. CAUTION When servicing this workstation, be sure that cables are placed in their proper location during the reassembly process. Improper cable placement can damage the workstation. Hard Drives Handle hard drives as delicate, precision components, avoiding all physical shock and vibration. This applies to failed drives as well as replacement spares. „ If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging and label the package "Fragile: Handle With Care." „ Do not remove hard drives from the shipping package for storage. Keep hard drives in their protective packaging until they are actually mounted in the workstation. „ Avoid dropping drives from any height onto any surface. „ If you are inserting or removing a hard drive, turn off the workstation. Do not remove a hard drive while the workstation is on or in Hibernate mode. „ Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid touching the connector. For more information about preventing electrostatic damage, refer to "Electrostatic Discharge Information" on page 62. „ Do not use excessive force when inserting a drive. „ Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. Lithium Coin Cell Battery The battery that comes with the workstation provides power to the real-time clock and has a minimum lifetime of about three years. For instructions on battery removal and replacement, see the "Battery" section on page 86. WARNING! This workstation contains a lithium battery. There is a risk of fire and chemical burn if the battery is handled improperly. Do not disassemble, crush, puncture, short external contacts, dispose in water or fire, or expose it to temperatures higher than 140 F (60 C). CAUTION Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. Batterij niet weggooien, maar inleveren als KCA. SERVICE CONSIDERATIONS 65