HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 145
SAS RAID 0 configuration
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
SAS RAID 0 configuration Follow the steps below to configure an Integrated Striped (IS) volume with the BIOS-based configuration utility. The configuration procedure assumes that the system already has the required disk and disk controllers. 1. On the Main menu screen of the BIOS-based configuration utility, use the arrow keys to select an adapter. 2. Press Enter to go to the Adapter Properties screen. 3. On the Adapter Properties screen, use the arrow keys to select RAID Properties on the screen. 4. Press Enter to go to the RAID Properties screen. 5. In the RAID Properties screen, use the arrow keys to select the first disk for the IS volume. Then use the arrow keys to move to the Array Disk column for this disk, and press the SPACE, +, or key to select Yes as the value for this column. If partitions are defined on the selected disk, a message appears warning you that data on the disk will be lost when the striped volume is created. Press the M key to migrate, or the D key to delete the data on the drive. 6. Repeat the previous step to select up to three more disks for the striped volume. 7. Press the C key to create the array once all drives have been chosen, then press Esc and SAVE. ENWW SAS RAID 0 configuration 135