HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 71
Front bezel, WARNING,
![]() |
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
WARNING! Before removing the workstation access panel, be sure that the workstation is powered off and that the power cord is disconnected from the electrical outlet. 1. Disconnect power from the system. 2. If a lock is present, unlock the access panel. The keys are on the rear panel (Rear panel components on page 4). Also, unlock any other locks that are present (Kensington, or Padlock). 3. Pull up on the handle and lift off the cover. Figure 4-5 Opening the access panel To replace the access panel, align the bottom groove of the side panel with the bottom edge of the chassis. Rotate the side panel toward the chassis and press firmly until the latch engages. Front bezel To remove the front bezel: 1. Lift up on the three (1) tabs located on the front bezel. 2. Rotate the front bezel away (2) from the chassis, and remove the bezel. ENWW Removing and replacing components 61
![](/manual_guide/products/hewlettpackard-xw8400-hp-xw8400-service-technical-reference-guide-1cc1199/71.png)