HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 87
Installing the fan in the card guide
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4. Remove the fan from the card guide by applying outward pressure on the card guide while lifting the fan away. Figure 4-24 Removing the fan from the card guide To install the front fan: 1. Place the fan in the card guide with the fan label facing into the card guide, and the fan protector screen facing outward. NOTE Ensure that the fan blows toward the rear of the chassis. 2. Place the fan wire through the slot in the card guide. 3. Snap the fan into place in the card guide. Figure 4-25 Installing the fan in the card guide 4. Lower the card guide with installed fan into the chassis. Place the card guide tabs into the chassis slots and snap the card guide into place. 5. Plug the fan wire into its connector on the system board. ENWW Removing and replacing components 77