HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 98
Processor heatsink, Removing the CPU heatsink
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
4. Attach a data cable from a SATA connector on the system board to the hard drive, and attach the fifth drive power cable to the drive. Figure 4-42 Attaching the data cable for the SATA hard drive in the fifth hard drive bay Processor heatsink Removing the CPU heatsink NOTE The following illustrated CPU heatsink is typical of what you might have in your workstation. Be aware that different variations of the CPU heatsinks exist, but the overall procedures listed are sufficient to assist you in removing the CPU heatsink. 1. Shut down the workstation, and disconnect power from the system ( Pre-disassembly procedures on page 55). Remove the access panel (Access panel on page 60), and place the workstation on its side with the system board facing up. 88 Chapter 4 Removal and replacement procedures ENWW