HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 158
Ultra ATA jumpers
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Ultra ATA jumpers NOTE This system supports a mixed configuration of UATA/IDE optical drives, and SAS and SATA hard drives. While HP supports the presence of SCSI and IDE hard drives, it does not ship any configurations using those drives. Ultra ATA drives are configured with jumper settings. Factory-installed drives ship with the jumpers preset to the cable-select mode; therefore, no jumper setting changes are required on factory preinstalled, replacement, or option drives. With cable-select, the drive is configured as either Master (Drive/Device 0) or Slave (Drive/Device 1) by its physical attachment to the cable. If you purchase a third-party hard drive, refer to the documentation included with the drive kit to ensure proper cable installation and configuration. NOTE All drives on a controller channel must have their jumpers either in the cable-select mode or have the individual drive jumper installed on the appropriate Master (Drive/Device 0) or Slave (Drive/Device 1) position. 148 Appendix C Appendix C - Ultra ATA devices ENWW