HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 99
CAUTION, Removing the CPU heatsink from the system board
![]() |
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
2. Remove the four processor screws slowly, being sure to loosen all the screws evenly. Loosen one pair of diagonally opposite screws (1) until the screw shanks disengage from the system board, and then loosen the remaining pair (2). Do not fully loosen one screw, then move on to the next. Loosen all of the screws a little at a time, so that the processor remains level. Figure 4-43 Identifying proper screw removal order 3. Disconnect the CPU heatsink fan connector (1) from the system board. 4. Before lifting the heatsink, carefully break the adhesive compound between the CPU heatsink and processor by rotating the heatsink back and forth (2). Figure 4-44 Removing the CPU heatsink from the system board 5. Use alcohol and a soft cloth to clean all of the thermal interface material residue from the CPU heatsink and processor. CAUTION Allow the alcohol on the processor and CPU heatsink to dry completely. ENWW Removing and replacing components 89
![](/manual_guide/products/hewlettpackard-xw8400-hp-xw8400-service-technical-reference-guide-1cc1199/99.png)