HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 62
Recommended materials and equipment, Required tools and software, Screws
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
● Keep work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam. ● Use field service tools, such as cutters, screwdrivers, and vacuums, that are conductive. Recommended materials and equipment It is recommended that the following materials and equipment be used to prevent static electricity: ● Antistatic tape ● Antistatic smocks, aprons, or sleeve protectors ● Conductive bins and other assembly or soldering aids ● Conductive foam ● Conductive tabletop workstations with ground cord of one-megohm ± 10% resistance ● Static-dissipative table or floor mats with hard tie to ground ● Field service kits ● Static awareness labels ● Wrist straps and footwear straps providing one-megohm ± 10% resistance ● Material handling packages ● Conductive plastic bags and tubes ● Conductive tote boxes ● Opaque shielding bags ● Transparent metallized shielding bags ● Transparent shielding tubes Required tools and software The following tools and software are required to service your workstation: ● Torx T-15 screwdriver or flathead screwdriver ● Diagnostics software Screws The screws used in the workstation are not interchangeable. They might have standard or metric threads and might be of different lengths. If an incorrect screw is used during the reassembly process, it can damage the unit. HP strongly recommends that all screws removed during disassembly be kept with the removed part and then returned to their proper locations. Special handling of components The following components require special handling when servicing the workstation. 52 Chapter 4 Removal and replacement procedures ENWW