HP Xw8400 HP xw8400 Service and Technical Reference Guide - Page 80
Installing a DIMM, - memory configuration
![]() |
UPC - 883585271085
View all HP Xw8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
● Load the memory module pairs in order of size, from smallest to largest. Figure 4-15 Identifying memory slots The BIOS generates warnings/errors on invalid memory configurations. ● If there is no way to obtain a valid memory configuration by disabling some of the plugged-in memory, the BIOS will halt with a diagnostics 2006 code for memory error (five beeps and blinks). ● If the BIOS can find a valid memory configuration by disabling some of the plugged-in memory, it will do so and report a warning during POST ("215-mismatched memory"). The system can still be booted in this condition. Installing a DIMM 1. Disconnect power from the system ( Pre-disassembly procedures on page 55) and remove the access panel (Access panel on page 60). Lay the workstation on its side with the system board facing up. 2. Press the green tab at the base of the memory fan (1) and lift it up (2) to expose the memory modules. Figure 4-16 Rotating the memory fan 70 Chapter 4 Removal and replacement procedures ENWW
![](/manual_guide/products/hewlettpackard-xw8400-hp-xw8400-service-technical-reference-guide-1cc1199/80.png)