HP t420 Administrator Guide 8 - Page 150
EAPPEAP/InnerAuth, EAPPEAP/PEAPVer
View all HP t420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Registry key root/Network/Wired/Profiles//IPv4/ Enabled root/Network/Wired/Profiles//IPv4/ Method root/Network/Wired/Profiles//IPv4/ SubnetMask root/Network/Wired/Profiles//IPv6/ Address root/Network/Wired/Profiles//IPv6/ DefaultGateway root/Network/Wired/Profiles//IPv6/ Enabled root/Network/Wired/Profiles//IPv6/ Method root/Network/Wired/Profiles//IPv6/ SubnetMask root/Network/Wired/Profiles//MTU root/Network/Wired/Profiles//Priority root/Network/Wired/Profiles//Security/ EAPPEAP/AnonyIdentity root/Network/Wired/Profiles//EAPPEAP/ CACert root/Network/Wired/Profiles//Security/ EAPPEAP/InnerAuth root/Network/Wired/Profiles//Security/ EAPPEAP/PEAPVer root/Network/Wired/Profiles//Security/ EAPPEAP/Password root/Network/Wired/Profiles//Security/ EAPPEAP/Username root/Network/Wired/Profiles//Security/ EAPTLS/CACert Description If set to 1, IPv4 is enabled for this profile. If set to Automatic, the client uses DHCP to attempt to retrieve network settings. If set to Static, the values of the Address, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile, because all clients would use the same IP address. Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting takes effect only if Method is set to Static. Sets the IPv6 address of the client. This setting takes effect only if Method is set to Static. Sets the default gateway that the device uses to communicate with the Internet. Typically, this is the IP address of the router. This setting takes effect only if Method is set to Static. If set to 1, IPv6 is enabled for this profile. If set to Automatic, the client uses DHCP to attempt to retrieve network settings. If set to Static, the values of the Address, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile, because all clients would use the same IP address.If set to Automatic, the client uses DHCP to attempt to retrieve network settings. If set to Static, the values of the Address, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile, because all clients would use the same IP address. Sets the subnet mask of the device, which is usually the IPv6 prefix length. This setting takes effect only if Method is set to Static. Sets the MTU. It does not matter if the IP address is static or acquired by DHCP. Reserved for wired network. Sets the anonymous identity for PEAP authentication. Sets the path to the CA certificate file for PEAP authentication. Sets the PEAP inner authentication protocol. Sets the PEAP version. Sets the password for PEAP authentication. Sets the username for PEAP authentication. Sets the path to the CA certificate file for TLS authentication. 138 Appendix D Registry keys