Home » HP Manuals » Desktops » HP t420 » Manual Viewer

HP t420 Administrator Guide 8 - Page 153

Security/EAPPEAP/AnonyIdentity, Security/EAPFAST/Username

Add to My Manuals
Save this manual to your list of manuals

Page 153 highlights

Registry key root/Network/Wireless/Profiles//IPv6/ DefaultGateway root/Network/Wireless/Profiles//IPv6/ Enabled root/Network/Wireless/Profiles//IPv6/ Method root/Network/Wireless/Profiles//IPv6/ SubnetMask root/Network/Wireless/Profiles// PowerEnable root/Network/Wireless/Profiles// Priority root/Network/Wireless/Profiles//SSID root/Network/Wireless/Profiles// SSIDHidden root/Network/Wireless/Profiles// Security/EAPFAST/AnonyIdentity root/Network/Wireless/Profiles// Security/EAPFAST/FastProvision root/Network/Wireless/Profiles// Security/EAPFAST/PACFile root/Network/Wireless/Profiles// Security/EAPFAST/Password root/Network/Wireless/Profiles// Security/EAPFAST/Username root/Network/Wireless/Profiles// Security/EAPPEAP/AnonyIdentity root/Network/Wireless/Profiles// Security/EAPPEAP/CACert root/Network/Wireless/Profiles// Security/EAPPEAP/InnerAuth root/Network/Wireless/Profiles// Security/EAPPEAP/PEAPVer root/Network/Wireless/Profiles// Security/EAPPEAP/Password root/Network/Wireless/Profiles// Security/EAPPEAP/Username root/Network/Wireless/Profiles// Security/EAPTLS/CACert Description Sets the default gateway the device uses to communicate with the Internet. Typically, this Is the IP address of the router. This setting takes effect only if Method is set to Static. If set to 1, IPv6 is enabled for this profile. If set to Automatic, the client uses DHCP to attempt to retrieve network settings. If set to Static, the values of the Address, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile, because all clients would use the same IP address. Sets the subnet mask of the device, which is usually the IPv6 prefix length. This setting takes effect only if Method is set to Static. If set to 1, power management of the wireless network card is enabled. Defines the priority of the network. For a wireless network, a larger number means a higher priority. High priority is preferred for a wireless network connection. Sets the wireless access point to use via SSID. Specifies whether the SSID of the wireless access point is hidden. Sets the anonymous identity for EAP-FAST authentication. Sets the provisioning option for EAP-FAST authentication. Sets the path to the PAC file for EAP-FAST authentication. Sets the password for EAP-FAST authentication. Sets the username for EAP-FAST authentication. Sets the anonymous identity for EAP PEAP authentication. Sets the path to the CA certificate file for EAP PEAP authentication. Sets the PEAP inner authentication protocol. Sets the PEAP version. Sets the password for EAP PEAP authentication. Sets the username for EAP PEAP authentication. Sets the path to the CA certificate file for TLS authentication. Network 141

Section	Page
Getting started	13
Finding more information	13
Choosing an OS configuration	14
Choosing a remote management service	15
Starting the thin client for the first time	15
Switching between administrator mode and user mode	15
GUI overview	16
Desktop	16
Taskbar	17
Connection configuration	18
Desktop connection management	18
Connection Manager (ThinPro only)	19
Advanced connection settings	19
Kiosk mode	20
Connection types	22
Citrix	22
Citrix Connection Manager	22
Connection	22
Configuration	23
General Settings	24
Options	24
Local Resources	25
Window	25
Firewall	26
Keyboard Shortcuts	26
Session	27
Advanced	27
RDP	27
RDP per-connection settings	27
Network	27
Service	28
Window	29
Options	29
Local Resources	30
Experience	31
Diagnostics	31
Advanced	32
RemoteFX	32
RDP multi-monitor sessions	32
RDP multimedia redirection	33
RDP device redirection	33
RDP USB redirection	33
RDP mass storage redirection	33
RDP printer redirection	34
RDP audio redirection	34
RDP smart card redirection	35
VMware Horizon View	35
VMware Horizon View per-connection settings	35
Network	35
General	36
Security	37
RDP Options	37
RDP Experience	38
Advanced	39
VMware Horizon View multi-monitor sessions	39
VMware Horizon View keyboard shortcuts	39
VMware Horizon View device redirection	40
VMware Horizon View USB redirection	40
VMware Horizon View audio redirection	40
VMware Horizon View smart card redirection	40
VMware Horizon View webcam redirection	41
Changing the VMware Horizon View protocol	41
VMware Horizon View HTTPS and certificate management requirements	41
Web Browser	42
Web Browser per-connection settings	42
Configuration	43
Preferences	43
Advanced	43
Additional connection types (ThinPro only)	43
TeemTalk	43
Configuration	43
TeemTalk Session Wizard	44
Advanced	45
XDMCP	45
Configuration	45
Advanced	45
Secure Shell	45
Configuration	46
Advanced	46
Telnet	46
Configuration	46
Advanced	47
Custom	47
Configuration	47
Advanced	47
HP True Graphics	48
Server-side requirements	48
Client-side requirements	48
Client-side configuration	48
Compression settings	48
Window settings	49
Monitor layout and hardware limitations	49
Enabling HP True Graphics for multiple monitors on the HP t420	49
Tips & best practices	50
Active Directory integration	51
Login screen	51
Single sign-on	51
Desktop	51
Screen lock	52
Administrator mode	52
Settings and the domain user	52
Start menu	53
Connection management	53
Switch to Administrator/Switch to User	53
System Information	53
Control Panel	53
Tools	53
Power	54
Search	54
Control Panel	55
System	55
Network settings	55
Wired network settings	56
Wireless network settings	56
DNS settings	58
IPSec rules	59
Configuring VPN settings	59
Configuring HP Velocity	59
DHCP options	60
Component Manager	60
Removing components	60
Undoing a change	61
Applying the changes permanently	61
Security	61
Security settings	61
Local Accounts	62
Encryption	62
Options	62
Certificates	63
Certificate Manager	63
SCEP Manager	63
Manageability	64
Active Directory configuration	64
Status tab	64
Options tab	65
HP ThinState	65
Managing an HP ThinPro image	65
Capturing an HP ThinPro image to an FTP server	65
Deploying an HP ThinPro image using FTP or HTTP	66
Capturing an HP ThinPro image to a USB flash drive	66
Deploying an HP ThinPro image with a USB flash drive	67
Managing a client profile	67
Saving a client profile to an FTP server	67
Restoring a client profile using FTP or HTTP	67
Saving a client profile to a USB flash drive	68
Restoring a client profile from a USB flash drive	68
VNC Shadowing	68
Input Devices	69
Hardware	69
Display preferences	70
Redirecting USB devices	70
Configuring printers	71
Appearance	71
Customization Center	72
System Information	73
HP Smart Client Services	74
Supported operating systems	74
Prerequisites for HP Smart Client Services	74
Obtaining HP Smart Client Services	74
Viewing the Automatic Update website	75
Creating an Automatic Update profile	75
MAC-address-specific profiles	75
Updating thin clients	76
Using the broadcast update method	76
Using the DHCP tag update method	76
Example of performing DHCP tagging	76
Using the DNS alias update method	77
Using the manual update method	77
Performing a manual update	77
Profile Editor	78
Opening Profile Editor	78
Loading a client profile	78
Client profile customization	78
Selecting the platform for a client profile	78
Configuring a default connection for a client profile	79
Modifying the registry settings of a client profile	79
Adding files to a client profile	79
Adding a configuration file to a client profile	79
Adding certificates to a client profile	80
Adding a symbolic link to a client profile	80
Saving the client profile	80
Serial or parallel printer configuration	81
Obtaining the printer settings	81
Setting up printer ports	81
Installing printers on the server	81
Troubleshooting	83
Troubleshooting network connectivity	83
Troubleshooting Citrix password expiration	83
Using system diagnostics to troubleshoot	83
Saving system diagnostic data	84
Uncompressing the system diagnostic files	84
Uncompressing the system diagnostic files on Windows-based systems	84
Uncompressing the system diagnostic files in Linux- or Unix-based systems	84
Viewing the system diagnostic files	84
Viewing files in the Commands folder	84
Viewing files in the /var/log folder	85
Viewing files in the /etc folder	85
USB updates	86
HP ThinUpdate	86
BIOS tools (desktop thin clients only)	87
BIOS settings tool	87
BIOS flashing tool	87
Resizing the flash drive partition	88
Registry keys	89
Audio	89
CertMgr	90
ComponentMgr	90
ConnectionManager	90
ConnectionType	91
custom	91
firefox	94
freerdp	98
ssh	108
teemtalk	112
telnet	115
view	119
xdmcp	127
xen	131
DHCP	143
Dashboard	143
Display	144
Imprivata	146
Network	146
Power	156
SCIM	158
ScepMgr	158
Search	159
Serial	159
SystemInfo	160
TaskMgr	160
USB	160
auto-update	161
background	163
config-wizard	164
desktop	165
domain	166
entries	167
firewall	167
hwh264	168
keyboard	168
logging	169
login	169
mouse	170
restore-points	170
screensaver	170
security	172
shutdown	173
sshd	173
time	173
touchscreen	175
translation	175
usb-update	176
users	176
vncserver	179
zero-login	181

Match case Limit results 1 per page

Registry key

Description

root/Network/Wireless/Profiles/<UUID>/IPv6/

DefaultGateway

Sets the default gateway the device uses to communicate with

the Internet. Typically, this Is the IP address of the router. This

setting takes

eﬀect

only if

Method

is set to

Static

root/Network/Wireless/Profiles/<UUID>/IPv6/

Enabled

If set to 1, IPv6 is enabled for this

proﬁle.

root/Network/Wireless/Profiles/<UUID>/IPv6/

Method

If set to

Automatic

, the client uses DHCP to attempt to retrieve

network settings. If set to

Static

, the values of the

Address

SubnetMask

, and

DefaultGateway

registry keys are used.

HP does not recommend using

Static

in a generic client

proﬁle,

because all clients would use the same IP address.

root/Network/Wireless/Profiles/<UUID>/IPv6/

SubnetMask

Sets the subnet mask of the device, which is usually the IPv6

preﬁx

length. This setting takes

eﬀect

only if

Method

is set to

Static

root/Network/Wireless/Profiles/<UUID>/

PowerEnable

If set to 1, power management of the wireless network card is

enabled.

root/Network/Wireless/Profiles/<UUID>/

Priority

Deﬁnes

the priority of the network. For a wireless network, a

larger number means a higher priority. High priority is preferred

for a wireless network connection.

root/Network/Wireless/Profiles/<UUID>/SSID

Sets the wireless access point to use via SSID.

root/Network/Wireless/Profiles/<UUID>/

SSIDHidden

Speciﬁes

whether the SSID of the wireless access point is hidden.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPFAST/AnonyIdentity

Sets the anonymous identity for EAP-FAST authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPFAST/FastProvision

Sets the provisioning option for EAP-FAST authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPFAST/PACFile

Sets the path to the PAC

ﬁle

for EAP-FAST authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPFAST/Password

Sets the password for EAP-FAST authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPFAST/Username

Sets the username for EAP-FAST authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/AnonyIdentity

Sets the anonymous identity for EAP PEAP authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/CACert

Sets the path to the CA

certiﬁcate

ﬁle

for EAP PEAP

authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/InnerAuth

Sets the PEAP inner authentication protocol.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/PEAPVer

Sets the PEAP version.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/Password

Sets the password for EAP PEAP authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPPEAP/Username

Sets the username for EAP PEAP authentication.

root/Network/Wireless/Profiles/<UUID>/

Security/EAPTLS/CACert

Sets the path to the CA

certiﬁcate

ﬁle

for TLS authentication.

Network

141