IBM 26K6477 User Guide - Page 60
configuration
View all IBM 26K6477 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Privacy protocol You use this option to select one of the following privacy protocols: none or Symmetric Encryption Protocol (SEP) Data Encryption Standard (DES). If you do not select this protocol, SMASH does not require the privacy password and does not use it when processing the user profile. When you select DES, SMASH uses the privacy password to encrypt outgoing messages and to decrypt incoming messages. Access type Specifies the access level for this user profile. Change this to Set to allow full read-write functionality by the SMASH Proxy. Change this to Get to allow read-only functionality by the SMASH Proxy. Host name or IP address Optional, you can leave this field blank for SMASH. For more details on SNMP configuration, see "Configuring SNMPv3 in the SMASH Proxy" on page 39. An in-depth view of the BladeCenter Management Module Web interface can be found in Management Module User's Guide - IBM BladeCenter, BladeCenter T, which you can access from Chapter 7, "SMASH-related documentation," on page 109. SLP configuration in the MM Note: By default, on the MM, the SLP is set to Multicast. IBM recommends this setting remain unchanged. On the BladeCenter Management Module, under Service Location Protocol (SLP), you can set the SLP to either Broadcast or Multicast. If you set it to Broadcast, you can do an oemiicmdiscover process by unicast address (for example, 10.0.0.3), subnet broadcast address (for example, 10.0.0.255) or global broadcast address (for example, 255.255.255.255), but not by multicast address. If you set it to Multicast with a multicast address of 239.255.255.253, the default, you can do an oemiicmdiscover process by unicast address, subnet broadcast address or multicast address, but not by global broadcast address. 44 SMASH Proxy Installation and User's Guide