IBM 6500-V5P Maintenance Manual - Page 348

Paper Guide Assembly Paper Guide Assembly This procedure applies only to cabinet models. Removal 1. Prepare the printer for maintenance (page 313). 2. Open the printer cover. 3. Loosen-do not remove-the three paper guide assembly hold-down screws (Figure 19). 4. Slide the paper guide assembly to the left and lift it off the card cage. Installation 1. Position the paper guide assembly offset slightly to the left on the card cage with the keyway cutouts over the three loosened hold-down screws (Figure 19). 2. Slide the paper guide assembly to the right, engaging the three hold-down screws in the keyway slots. Slide the paper guide assembly to the right as far as it will go. 3. Tighten the three hold-down screws (Figure 19). 4. Return the printer to normal operation (page 314). Screw Paper Guide Assembly Screw Figure 19. This figure shows how to remove the paper guide assembly from the card cage. 348