IBM 86607SU Hardware Maintenance Manual - Page 141

8. Remove the HardwareGuide CD and press Ctrl+Alt+Del to restart the server. Initializing, viewing, or synchronizing the ServeRAID II controller configuration: The ServeRAID configuration information stored in nonvolatile random-access memory (NVRAM) is critical to the reliable operation of the disk array. To protect the integrity of the configuration information, the configuration information is also stored in an EEPROM and on each RBL and ONL hard disk drive. Each time you change the configuration information, all corresponding copies are updated automatically. During POST, if the NVRAM configuration information does not match the configuration information stored in the EEPROM or on the hard disk drives, an error message appears. You can use the Init/View/Synchronize Config menu to initialize, view, or synchronize the ServeRAID controller configuration information. To initialize, view, or synchronize the configuration information: 1. Start the ServeRAID Configuration program (see "Starting the ServeRAID Configuration program" on page 77). 2. Select Advanced Functions from the Main Menu; then, press Enter. 3. Select Init/View/Synchronize Config from the next menu; then, press Enter. A screen similar to the following appears. IBM ServeRAID Adapter Disk Array Configuration Ver. X.XX Adapter Number: 1 Bus Number: 0 Host ID = Null Config Init/View/MMSaayiinnnchMMreeonnnuuize Config 1. Help 2. Initialize Configuration 3. View NVRAM Configuration 4. View EEPROM Configuration 5. View Hard Drive Configuration 6. View Change List 7. Configuration Synchronization 8. Exit Ch 1 Array Bay 1 ONL A 2 ONL A 3 ONL A 4 5 6 7 8 INI 9 10 11 12 13 14 15 16 Ch 2 Array Bay 1 HSP 2 ONL B 3 4 5 ONL B 6 RDY 7 CDR 8 INI 9 10 11 12 13 14 15 16 Select a choice using the Up Arrow ( ) and Down Arrow ( ) keys and press Enter. Press Esc to return to previous menu. Descriptions of the choices available from this menu are as follows: Help provides information about the choices available on the menu. You also can press F1 from any screen to obtain online Help. Initialize Configuration lets you set the configuration of the ServeRAID controller to its Netfinity 5500 - Type 8660 133