IBM 86607SU Hardware Maintenance Manual - Page 158
World Wide Web., mm 4 inches of clearance at the rear of the server
UPC - 087944501329
View all IBM 86607SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Before you begin Notes: 1. You do not need to turn the server off to install or replace hot-swap power supplies, hot-swap drives, hot-swap fans, or hot-plug PCI adapters. 2. The color orange on components or labels in the Netfinity 5500 indicates hot-plug components. Become familiar with the safety procedures, see "Safety information" on page 308. Make sure that you have an adequate number of properly grounded electrical outlets for the server, monitor, and any other options that you intend to install. Place the server in a location that is dry. Rain or spilled liquids might damage the server. Leave about 50 mm (2 inches) of ventilated space on the right and left sides of the server to allow the server cooling system to work properly. Leave 100 mm (4 inches) of clearance at the rear of the server for cables. Have a supply of 1 MB and 2 MB, 3.5-inch diskettes available. Back up all important data before you make changes to disk drives. Have a small, flat-blade screwdriver available. For a list of supported options for the Netfinity 5500, refer to http://www.ibm.com/pc/us/compat/ on the World Wide Web. 150 Netfinity Server HMM