IBM 86607SU Hardware Maintenance Manual - Page 75

management processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password is case sensitive. You must use all caps, and the "0" in PASSW0RD is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important If you update the system management processor microcode, the default username (USERID) and password (PASSW0RD) are reset. If applicable, notify the system administrator. When you have logged into the system management processor, the following main menu appears: 2 Monitors 3 Error Logs 4 Service Processor Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video To access a menu item, press the number or letter that corresponds to the information you want to access. After you select a menu item, subsequent menus will offer more specific information that pertains to the selection you made from the main menu. Note Selecting Y Disconnect Current Logon ends the current session and requires you to enter a new username and password before continuing. Selecting Read displays the last entry. Selecting Read Last steps backwards through the entries. Selecting Write executes the command. Menu Selection Monitors Error Logs Data Available for Viewing System board temperature, CPU temperatures, power supply temperatures, voltage readings, voltage regulator module readings, fan status, redundant power supply status Contents of system error log Netfinity 5500 - Type 8660 67