IBM 86607SU Hardware Maintenance Manual - Page 226
To install an additional microprocessor kit, terminator card when you have a second
![]() |
UPC - 087944501329
View all IBM 86607SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Note The illustration shows only the processor board for simplicity; you do not need to remove the processor board to install a microprocessor kit. 1 Voltage regulator module (VRM) for secondary microprocessor 2 VRM for primary microprocessor 3 Primary microprocessor (CPU or processor 1) 4 Secondary microprocessor connector 5 Terminator card 6 Secondary microprocessor (CPU or processor 2) 7 Latches 8 Connector for VRM for secondary microprocessor To install an additional microprocessor kit: 1. Turn off the server and peripheral devices and disconnect all external cables and power cords (see "Preparing to install options" on page 220); then remove the top cover (see "Top cover removal" on page 262). 2. Remove the terminator card 5 from the secondary microprocessor connector 4 . You do not need the terminator card when you have a second microprocessor installed. You can store it in a safe place in the static-protective package that the new microprocessor is shipped in. 3. Install the microprocessor: a. Touch the static-protective package containing the new microprocessor to any unpainted metal surface on the server; then, remove the microprocessor from the package. 218 Netfinity Server HMM
![](/manual_guide/products/ibm-866011u-hardware-maintenance-manual-12f5559/226.png)