IBM 86607SU Hardware Maintenance Manual - Page 85

Starting the ServeRAID Configuration program You can start the ServeRAID Configuration program in one of three ways. Choose one of these startup methods, and follow the appropriate instructions. During the initial startup of the server using ServerGuide (see "During the initial startup of the server"). After an operating system is installed using ServerGuide (see "After an operating system is installed"). Using diskettes (see "Using diskettes to start the ServeRAID Configuration program"). During the initial startup of the server: Using ServerGuide, insert the HardwareGuide CD in the CD-ROM drive and start the server. Follow the instructions in the serverGuide package to start the ServeRAID Configuration program. When the ServeRAID Configuration program starts, go to "Using the ServeRAID Configuration program" on page 101 for more information. After an operating system is installed Notes 1. Ensure that the CD-ROM is enabled as the startup drive. (See "Start options" on page 97 for additional information.) 2. If a screen appears asking you to select an operating system, select the operating system that you have installed. This does not reinstall the operating system. This is for information only. Insert the HardwareGuide CD in the CD-ROM drive and start the server. Follow the instructions in the serverGuide package to start the ServeRAID Configuration Program. When the ServeRAID Configuration Program starts, go to "Using the ServeRAID Configuration program" on page 101 for more information. Using diskettes to start the ServeRAID Configuration program: If you choose to use diskettes to configure the ServeRAID controller, you must first make the ServeRAID diskettes. You can make the diskettes using the Diskette Factory feature of ServerGuide. Refer to the serverGuide documentation for instructions. You can also download the diskette images from the World Wide Web. See "Online support" on Netfinity 5500 - Type 8660 77