IBM 86607SU Hardware Maintenance Manual - Page 294
ServeRAID II controller error, codes/messages, Initializing Adapter Number 1.
![]() |
UPC - 087944501329
View all IBM 86607SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
ServeRAID II controller error codes/messages Use the following ServeRAID II controller error code/message information when diagnosing ServeRAID problems. The error codes/messages are displayed on the screen in a line of text immediately after the the adapter BIOS version screen similar to the following appears. IBM PC ServeRAID Adapter BIOS Copyright IBM Corp. 1995,1997 BIOS Ver. x.xx.x xx/xx/xx Press Ctrl+I to start the MiniConfig Utility. The following message is displayed on the screen. Initializing Adapter Number 1. Please Wait. Starting Drives. Firmware Version: x.xx.xx ᑍ Adapter POST & configuration Error Codes: IPSR=xxxx BCS=xx ECS=xx The interrupt status port register (IPSR) codes, basic configuration status (BCS) messages, and extended configurations status (ECS) messages identify the Controller State. The BCS and ECS codes indicate a configuration change. Configuration change information is displayed on the screen in text following the IPSR code. Note Do Not replace a planar (system board) for RAID problems that has an integrated on-board ServeRAID Controller if the system board is not listed as the FRU/Action in the following index. Refer to RAID adapter HMM S10L-9147-00 for recovery procedures for DDD drives. 286 Netfinity Server HMM
![](/manual_guide/products/ibm-866011u-hardware-maintenance-manual-12f5559/294.png)