IBM 86607SU Hardware Maintenance Manual - Page 56

Using the ServeRAID monitoring functions: This section contains instructions for using the ServeRAID Administration and Monitoring utility program to monitor the ServeRAID controller status information, event logs, logical drive information, and physical device information. Monitoring status information: You can monitor the ServeRAID controller status by clicking on the active ServeRAID controller button on the Main Screen of the Administration and Monitoring utility program. The currently active ServeRAID controller button is indicated by a green or red light. (Green indicates an active controller; red indicates that the controller is not responding.) If there is more than one ServeRAID controller in the system, click on the appropriate button to make it active. A screen similar to the following appears. Adapter Information Adapter Number 1 Number of Logical Drives 6 Unattended Mode Off Code Block Version 97125 Boot Block Version 96340 Concurrent Commands 64 Maximum Devices Supported 45 Flash Program Count 2650 Defunct Disk Count 0 Rebuild Rate High Hot-Swap Rebuild Disabled Offline Logical Drive Count 0 Device Event Log Hard Event Log Soft Event Log OK Descriptions of the information that appears on the screen are as follows. Note You might have to scroll down, using the scroll bar, to see all of the items that appear on this screen. Adapter Number Number of Logical Drives The active ServeRAID controller (1 to 8). The number of defined logical drives (0 to 8). 48 Netfinity Server HMM