IBM 86607SU Hardware Maintenance Manual - Page 34

Note You must first make the ServeRAID diskettes using the Diskette Factory feature of ServerGuide. Refer to the ServerGuide package for instructions. Also, if you are using OS/2, Novell NetWare/IntraNetware, or SCO OpenServer, you must use the Administration and Monitoring utility program in the client/server mode. To install the Administration and Monitoring utility program using diskettes: 1. Ensure that the system is turned on and Windows NT or Windows 95 is installed. Refer to the documentation that comes with the operating system for installation instructions. 2. Insert the Administration and Monitoring Utility Program Diskette that you created into the diskette drive. 3. At the Run prompt, type: a:setup 4. Press Enter; then, follow the instructions that appear on the screen. For instructions on how to use the Administration and Monitoring utility program, see "Using the Administration and Monitoring Utility Program." Using the Administration and Monitoring Utility Program: You can use the Administration and Monitoring utility program to monitor the serverAID controllers, view the ServeRAID configuration and associated devices, rebuild an array, reassign a drive to replace a defunct drive, rebuild a logical drive, create a logical drive, create an array, delete an array, dynamically increase the logical drive size, change RAID levels, and much more. To start the Administration and Monitoring utility program: Double-click on the IBM ServeRAID Administration icon. or Select IBM ServeRAID Administration from the start menu. The Administration and Monitoring utility program starts in stand-alone mode. 26 Netfinity Server HMM