IBM 86607SU Hardware Maintenance Manual - Page 78

To access these functions: 1. Use a terminal program to establish a connection with the system management processor modem. 2. Log in to the system management processor. When you have established a connection with the system management processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the system management processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password is case sensitive. You must use all caps, and the "0" in PASSW0RD, is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important If you update the system management processor microcode, the default username (USERID) and password (PASSW0RD) are reset. If applicable, notify the system administrator. When you have logged into the system management processor, the following main menu appears: 2 Monitors 3 Error Logs 4 Service Processor Configuration 5 System Services 6 System Power 7 Boot B Remote Terminal Status Y Disconnect Current Logon Z Start Remote Video 3. Select 7 Boot. The following Boot menu appears: 1 Reboot w/OS Shutdown 2 Reboot immediately 3 Restart SP 4. Select a Boot menu item. Select 1 Reboot w/OS Shutdown to shutdown the server operating system and then restart the server. Select 2 Reboot immediately to restart the server immediately, without first shutting down the operating system. 70 Netfinity Server HMM