IBM DTCA-24090 Hard Drive Specifications - Page 116
Minimum PIO Transfer Cycle Time With IORDY Flow Control
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Word | 53 | 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 79 80 81 82 83 Content XXX7H XXXXH XXXXH XXXXH XXXXH 0XXXH Note.3 XX07H XX07H 0003H 0078H 0078H 00F0H 0078H 0000H 000EH 0006H 000BH 4008H Description Validity flag of the word 15 3 Reserved 2(=1) 1=Word 88 is Valid 1(=1) 1=Word 64 70 are Valid 0(=1) 1=Word 54 58 are Valid Number of current cylinders Number of current heads Number of current sectors per track Current capacity in sectors Word 57 specifies the low word of the capacity Current Multiple setting. bit assignments 15 9(=0) Reserved 8 1= Multiple Sector Setting is Valid 70 xxh = Current setting for number of sectors Total Number of User Addressable Sectors Word 60 specifies the low word of the number Single Word DMA Transfer Capability 15 8 Single word DMA transfer mode active 7 0(=7) Single word DMA transfer modes supported (support mode 0,1 and 2) Multiword DMA Transfer Capability 15 8 Multi word DMA transfer mode active 7 0(=7) Multi word DMA transfer modes supported (support mode 0,1 and 2) Flow Control PIO Transfer Modes Supported 15 8(=0) Reserved 7 0(=3) Advanced PIO Transfer Modes Supported '11' = PIO Mode 3 and 4 Supported Minimum Multiword DMA Transfer Cycle Time Per Word 15 0(=78) Cycle time in nanoseconds (120ns, 16.6MB/s) Manufacturer's Recommended Multiword DMA Transfer Cycle Time 15 0(=78) Cycle time in nanoseconds (120ns, 16.6MB/s) Minimum PIO Transfer Cycle Time Without Flow Control 15 0(=F0) Cycle time in nanoseconds (240ns, 8.3MB/s) Minimum PIO Transfer Cycle Time With IORDY Flow Control 15 0(=78) Cycle time in nanoseconds (120ns, 16.6MB/s) Reserved Major version number 15 0(=0E) ATA 1, ATA 2 and ATA 3 Minor version number 15 0(=06) ATA 3 X3T10 2008D revision 1 Command set supported 15 4(=0) Reserved 3(=1) 1=supports Power Management Feature Set 2(=0) 1=supports Removable Feature Set 1(=1) 1=supports Security Feature Set 0(=1) 1=supports S.M.A.R.T Feature Set Command set supported 15(=0) Always 14(=1) Always 13 4(=0) Reserved 3(=1) 1=supports Advanced Power Management Feature Set 2 0(=0) Reserved Figure 65. Identify device information --- Continued --- 108 OEM Specifications of DTCA-2xxxx 2.5 inch H D D