IBM DTCA-24090 Hard Drive Specifications - Page 149
In CHS mode, this register contains max sector number= 63. L=0
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Sector Number In LBA mode, this register contains LBA bits 0 - 7 which is to be input.(L=1) In CHS mode, this register is ignored. ( L = 0 ) Cylinder High/Low In LBA mode, this register contains LBA bits 8 - 15 (Low), 16 - 23 (High) which is to be set. ( L = 1 ) In CHS mode, this register contains cylinder number which is to be input.(L=0) H In LBA mode, this register contains LBA bits 24 - 27 which is to be input.(L=1) In CHS mode, this register is ignored. ( L = 0 ) L LBA mode.Indicates the addressing mode.L=0 specifies CHS mode and L = 1 does LBA addressing mode. D The device number bit. Indicates that the device number bit of the Device/Head should be specified. D = 0 selects the master device and D = 1 selects the slave device. V Valid. Indicates that the bit is part of an output parameter and should be specified. - Indicates that the bit is not used. Input Parameters From The Device Sector Number In LBA mode, this register contains Adjusted max LBA bits 0 - 7.(L=1) In CHS mode, this register contains max sector number(= 63). ( L = 0 ) Cylinder High/Low In LBA mode, this register contains Adjusted max LBA bits 8 - 15 (Low), 16 - 23 (High). ( L = 1 ) In CHS mode, this register contains max cylinder number which is set. ( L = 0 ) H In LBA mode, this register contains Adjusted max LBA bits 24 - 27. ( L = 1 ) In CHS mode, this register contains max head number(= 15).(L=0) V Valid. Indicates that the bit is part of an input parameter and will be set to 0 or 1 by the device. - Indicates that the bit is not used. Command Descriptions 141