IBM DTCA-24090 Hard Drive Specifications - Page 166
Standby Immediate, E0h/94h
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
12.32 Standby Immediate (E0h/94h) Command Block Output Registers Register 76543210 Data Feature Sector Count Sector Number Cylinder Low Cylinder High Device/Head 1 1D Command 11100000 Command Block Input Registers Register 76543210 Data Error ...See Below... Sector Count Sector Number Cylinder Low Cylinder High Device/Head Status ...See Below... Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 00000V00 Status Register 76543210 BSY RDY DF DSC DRQ COR IDX ERR 0V0V 0 V Figure 102. Standby Immediate Command (E0h/94h) The Standby Immediate command causes the device to enter Standby mode immediately. When this command is issued, the device confirms the completion of the cached write commands before asserts INTRQ. Then the device is spun down, but the interface remains active. If the device is already spun down, the spin down sequence is not executed. During the Standby mode, the device will respond to commands, but there is a delay while waiting for the spindle to reach operating speed. The Standby Immediate command will not affect the auto power down timeout parameter. 158 OEM Specifications of DTCA-2xxxx 2.5 inch H D D