IBM DTCA-24090 Hard Drive Specifications - Page 129
High. L=1
View all IBM DTCA-24090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
12.15 Read Native Max LBA/CYL (F8h: Vendor Specific) Command Block Output Registers Register 76543210 Data Feature Sector Count Sector Number Cylinder Low Cylinder High Device/Head 1L1D Command 11111000 Command Block Input Registers Register 76543210 Data Error ...See Below... Sector Count Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head HHHH Status ...See Below... Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 00000V00 Status Register 76543210 BSY RDY DF DSC DRQ COR IDX ERR 0V0 0 V Figure 75. Read Native Max LBA/CYL (F8h) This command returns the native max LBA/CYL of H D D which is not effected by Set Max LBA/CYL command. Output Parameters To The Device L LBA mode.Indicates the addressing mode.L=0 specifies CHS mode and L = 1 does LBA addressing mode. D The device number bit. Indicates that the device number bit of the Device/Head Register should be specified. D = 0 selects the master device and D = 1 selects the slave device. - Indicates that the bit is not used. Input Parameters From The Device Sector Number In LBA mode, this register contains native max LBA bits 0 - 7. ( L = 1 ) In CHS mode, this register contains native max sector number. ( L = 0 ) Cylinder High/Low In LBA mode, this register contains native max LBA bits 8 - 15 (Low), 16 - 23 (High). ( L = 1 ) In CHS mode, this register contains native max cylinder number. ( L = 0 ) H In LBA mode, this register contains native max LBA bits 24 - 27. ( L = 1 ) In CHS mode, this register contains native max head number.(L=0) Command Descriptions 121